How To Install Window Blinds In San Antonio

Countless San Antonio homeowners choose window blinds when they want more privacy and governance over sunlight in their properties. They’re a practical and budget-friendly window covering. They also take just a few steps to place for skilled do-it-yourselfers. However, nothing beats the ease of choosing an expert window treatment installer. Here are the essential steps of installing window blinds and when you should phone the professionals to complete it for you.

Take Measurements And Mark Everything Accurately

Prior to starting, figure out if you want inside-mount blinds or outside-mount. This vital bit of info will let you know where to measure. Measure the width, height, and depth inside your window frame for inside-mount options. When hanging outside-mount blinds, measure the width and height of your window, which includes the trim, and then increase your measurements by three inches to make sure you get good coverage. Measure exactly–don’t round up or down. Ill-fitting blinds will not operate correctly.

Order Your Blinds

After you get your dimensions, you are ready to find your blinds. You may already know what kind of blinds you wish to have. Pick blinds that coincide with your measurements as closely as possible. Off-the-rack blinds might not fit exactly, either jutting out too far or not meeting the edge of the window properly. Be sure to have hardware that lets your blinds install at the proper depth, also. You’ll want to choose tailor-made blinds for a superior fit.

Install Your Blinds

Your blinds should come with instructions. Use them to install your exact product. If you wish to have a glimpse of how challenging it is to install window blinds in San Antonio, here is a summary of common steps to offer a general idea.

 

Inside Mount Blinds

 

1. Put a bracket at the top of the inside of the window approximately one inch from the side. Check that this positioning won’t hinder the blind’s function. Mark the bracket holes with a pencil.
2. Drill pilot holes on your marks.
3. Line up the hardware over your holes and secure with screws.
4. Repeat these initial three steps for the next bracket.
5. Pop the end caps onto the top rail of your blinds. Slide the headrail into the brackets.

Attach the tilt wand and test. Additionally, test the pull cord.

Outside Mount Blinds

1. Decide if you’re installing on the window trim or wall surrounding the window. Hold up the headrail and make sure the blind extends to the lower edges of the window.
2. Mark each end of the headrail.
3. Measure four inches from your headrail marks and mark your bracket holes here.
4. Drill pilot holes in the proper spots.
5. Situate the brackets with the pilot holes and fasten with screws at each end.
6. Slide the headrail into the brackets.

Attach the tilt wand and test out everything to make sure it works.

Pick The Easiest Way To Install Blinds 

As you know, you don’t need to put up blinds yourself. The easiest way to install window blinds in San Antonio is to hire a trusted window treatment installer. They will assist you every step of the way. They’ll help you pick blinds that accommodate your needs and preferences, make accurate measurements for a custom product, and attach them for you. They do this daily, so they’ll handle your job efficiently and accurately. They’ll know how to troubleshoot any issues without wasting hours looking for help online. A window treatment expert will also have a higher quality of blinds than large retail outlets or online marketplaces.

Avoid The Trouble And Have Sunburst Shutters Install Your Window Blinds In San Antonio

Getting new window blinds in San Antonio couldn’t be easier when you consult with Sunburst Shutters San Antonio. We’ll help you select custom blinds that will suit your windows exactly, and our professional installation staff will attach them for you. All you must do is dial 210-876-0377 or fill out the form below to schedule a no-cost in-home consultation.